87138C
1.INSPECT BLOWER RESISTOR
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Blower Resistor) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 4 (LO) - 1 (HI) | Always | 2.08 to 2.40 W |
| 3 (M1) - 1 (HI) | Always | 1.32 to 1.52 W |
| 2 (M2) - 1 (HI) | Always | 0.39 to 0.45 W |
If the result is not as specified, replace the heater blower resistor.