88410
1.INSPECT COMPRESSOR AND MAGNETIC CLUTCH
Check the magnet clutch operation.
Confirm that the magnet clutch hub and magnet clutch rotor lock when the positive battery lead is connected to terminal 1 (MG+) of the magnet clutch, and the negative lead is connected to the ground wire.
| *1 | Magnet Clutch Rotor |
| *2 | Magnet Clutch Hub |
| *3 | Battery |
| *a | Component without harness connected
(Compressor and Magnet Clutch Assembly) |
If the operation is not as specified, replace the magnet clutch assembly.