Home › Vehicle Interior › AIR CONDITIONING › COMPRESSOR (for 14B) › 2017.01–2019.08
RM2850E _58 Vehicle Interior _073207 AIR CONDITIONING _0356307 COMPRESSOR(for 14B) G

AIR CONDITIONING  COMPRESSOR(for 14B)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1. MAKE THE FOLLOWING VISUAL CHECKS (Magnetic Clutch)

a.

Leakage of grease from the clutch bearing.


b.

Signs of oil on the pressure plate or rotor.

Repair or replace, as necessary.


Hide 2.INSPECT MAGNETIC CLUTCH BEARING FOR NOISE (Magnetic Clutch)

a.

Start engine.


b.

Check for abnormal noise from near the compressor when the A/C switch is OFF.

If abnormal noise is being emitted, replace the magnetic clutch.


Hide 3.INSPECT MAGNETIC CLUTCH (Magnetic Clutch)

a.
E393750

Disconnect the connector from the magnetic clutch.


b.

Connect the positive (+) lead from the battery to the terminal on the magnetic clutch connector and the negative (-) lead to the body ground.


c.

Check that the magnetic clutch is energized.

If operation is not as specified, replace the magnetic clutch.


Hide 4.INSTALL MANIFOLD GAUGE SET (Compressor)

Hide 5. START ENGINE (Compressor)

Hide 6.INSPECT COMPRESSOR FOR METALLIC SOUND (Compressor)

Check if there is a metallic sound from the compressor when the A/C switch is on.

If metallic sound is heard, replace the compressor assembly.

Hide 7.INSPECT PRESSURE OF REFRIGERATION SYSTEM (Compressor)

Hide 8. STOP ENGINE (Compressor)

Hide 9.INSPECT VISUALLY FOR LEAKAGE OF REFRIGERANT FROM SAFETY SEAL (Compressor)

If there is any leakage, replace the compressor assembly.