Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for RHD vehicles.
87211
1.REMOVE NO. 1 AIR DUCT
Remove the clip.
Detach the 3 claws and remove the No. 1 air duct.
87211A
2.REMOVE NO. 2 AIR DUCT
Detach the 4 claws and remove the No. 2 air duct.
87107
3.REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY
Remove the screw and clamp.
Remove the 2 screws and 2 clamps.
Remove the heater radiator unit sub-assembly.
Remove the 2 screws and 2 clamp clips.
Remove the 2 O-rings from the heater water inlet pipe A and heater water outlet pipe A.
87103G
4.REMOVE FRONT HEATER BLOWER CASE SUB-ASSEMBLY
for RHD:
Remove the screw and clamp bracket.
Remove the 3 bolts and front heater blower case sub-assembly.
for LHD:
Remove the screw and clamp bracket.
Remove the 3 bolts and front heater blower case sub-assembly.
87138
5.REMOVE HEATER BLOWER RESISTOR
for RHD:
Remove the 2 screws and heater blower resistor.
for LHD:
Remove the 2 screws and heater blower resistor.
87114C
6.REMOVE HEATER COVER
Detach the claw.
Detach the 2 guides and remove the heater cover.
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
87441B
7.REMOVE HEATER AIR FILTER
for Paper Type:
Remove the heater air filter.
for Resin Type:
Detach the 2 claws and remove the heater air filter.