87138R
1.INSPECT REAR HEATER BLOWER RESISTOR
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Rear Heater Blower Resistor) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 4 - 1 | Always | 1.76 to 2.02 W |
| 2 - 1 | Always | 0.83 to 0.95 W |
| 3 - 1 | Always | 0.31 to 0.35 W |
If the result is not as specified, replace the rear heater blower resistor.
87103H
2.INSPECT REAR HEATER BLOWER CASE SUB-ASSEMBLY
Apply battery voltage to the rear heater blower case sub-assembly and check the operation of the motor.
| *a | Component without harness connected
(Rear Heater Blower Case Sub-assembly) |
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 1 |
The blower motor operates smoothly |
If the result is not as specified, replace the rear heater blower case sub-assembly.