Use the same procedure for the Front Side and Rear Side.
The procedure listed below is for the Rear Side.
87107R
1.INSTALL REAR HEATER UNIT SUB-ASSEMBLY
Install the rear heater unit sub-assembly to the air duct sub-assembly.
Install the air duct sub-assembly with rear heater unit sub-assembly.
|
Install in this Direction |
Install the upper heater case with the 6 screws.
87103H
2.INSTALL REAR HEATER BLOWER CASE SUB-ASSEMBLY
Pull up the claw and rotate it in the direction of the arrow shown in the illustration to install the rear heater blower case sub-assembly.
| *a | Claw |
87187A
3.INSTALL BLOWER MOTOR LEAD WIRE
Install the blower motor lead wire to the base.
Install the blower motor lead wire with base with the 3 screws.
Install the packing.
Connect the connector.
87138R
4.INSTALL REAR HEATER BLOWER RESISTOR
Install the rear heater blower resistor with the 2 screws.
Connect the connector.