Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for RHD vehicles.
A bolt without a torque specification is shown in the standard bolt chart.
Click hereGeneral>SPECIFICATIONS>STANDARD BOLT>SPECIFIED TORQUE FOR STANDARD BOLTS
58880D
1.INSTALL NO. 2 COOLING BOX LEG ASSEMBLY
Install the No. 2 cooling box leg assembly with the 2 bolts.
89910
2.INSTALL COOLER BOX ASSEMBLY
Install the 2 No. 2 cooling box brackets, 4 collars, 4 grommets with the 4 bolts.
Install the cooler box assembly with 2 No. 2 cooling box brackets with the 4 bolts.
3.INSTALL COOLING BOX
Connect the connector to install the cooling box.
Remove the 4 bolts.