Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
53182A
1.REMOVE HEADLIGHT COVER LH
Apply protective tape around the headlight cover LH.
|
Protective Tape |
Using moulding remover A, detach the 2 clips.
Place your hand in the open gap, detach the remaining 6 clips to remove the headlight cover LH.
2.REMOVE HEADLIGHT ASSEMBLY LH
Apply protective tape around the headlight assembly LH.
| *a | Pin |
| *b | Guide |
|
Protective Tape |
Remove the 2 bolts.
Pull the headlight assembly LH forward to detach the pin and guide to remove it.
Disconnect the connector.