Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81610F
1.REMOVE CLEARANCE LIGHT BULB
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the clearance light bulb from the bulb socket.
81118E
2.REMOVE NO. 1 HEADLIGHT BRACKET LH (for Driver Side)
Remove the 2 screws and No. 1 headlight bracket LH.
81510D
3.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the front turn signal light bulb from the bulb socket.
81110B
4.REMOVE NO. 1 HEADLIGHT BULB
Disconnect the cover.
Disconnect the connector.
Push and pull up the set spring to release it.
Remove the No. 1 headlight bulb.
Do not touch the glass part of the No. 1 headlight bulb.
81165
5.REMOVE HEADLIGHT CORD LH
Turn the clearance light bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the clearance light bulb from the bulb socket.
for Driver Side:
Remove the 2 screws and No. 1 headlight bracket LH.
Turn the front turn signal light bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the front turn signal light bulb from the bulb socket.
Disconnect the cover.
Disconnect the No. 1 headlight bulb connector.
Detach the claw to disconnect the connector.
Detach the 3 wire harness clamps to remove the headlight cord LH.
81176C
6.REMOVE NO. 1 HEADLIGHT COVER LH
Remove the 2 screws.
Detach the hook to remove the No. 1 headlight cover LH.
81156A
7.REMOVE HEADLIGHT BRACKET LH
Remove the 4 screws and 2 No. 1 gear unit assemblies LH.
Remove the screw and headlight bracket LH.