Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81560
1.INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
Set and push the rear combination light assembly LH towards the vehicle front to attach the 2 pins and clip.
Install the 3 screws.
Install the 3 nuts.
3.2 N*m (33 kgf*cm, 28 in.*lbf)
Connect the connector.
64746
2.INSTALL REAR COMBINATION LIGHT SERVICE COVER LH
Attach the 2 guides to set the rear combination light service cover LH.
Attach the 7 claws to install the rear combination light service cover LH.
3.INSTALL REAR BUMPER ASSEMBLY