81270
1.INSTALL LICENSE PLATE LIGHT ASSEMBLY
Attach the 2 wire harness clamps.
Align the 2 guides.
Align the license plate light assembly and the screw hole on the back door outside garnish to set it in place.
Install the 2 screws.
76811A
2.INSTALL BACK DOOR OUTSIDE GARNISH
for Luggage Compartment:
Click hereVehicle Interior>EXTERIOR>BACK DOOR OUTSIDE GARNISH(for Luggage Compartment)>INSTALLATION
for Double Swing Out Type:
Click hereVehicle Interior>EXTERIOR>BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type)>INSTALLATION