Home › Vehicle Interior › LIGHTING › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM2850E _58 Vehicle Interior _073208 LIGHTING _0356321 HIGH MOUNTED STOP LIGHT ASSEMBLY A

LIGHTING  HIGH MOUNTED STOP LIGHT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 81977 1.REMOVE CENTER STOP LIGHT COVER

a.
E360910

Using a screw driver, detach the 4 claws.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
V100155

Protective Tape


b.
E360912

Using a screwdriver, insert the 2 cutouts and detach the 2 pins.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
V100155

Protective Tape


c.
E360915

Pull the center stop light cover toward the rear of the vehicle to detach the 8 guides to remove it.


Hide 81570 2.REMOVE CENTER STOP LIGHT ASSEMBLY

a.
E360914

Remove the 2 screws.


b.

Pull the center stop light assembly toward the rear of the vehicle to detach the pin to remove it.


c.
E360916

Disconnect the connector.


Hide 63316A 3.REMOVE NO. 6 ROOF HEADLINING

a.

Perform the linked removal procedures from the No. 4 mat set plate to the No. 6 roof headlining.

Click hereVehicle Interior>INTERIOR>ROOF HEADLINING>REMOVAL


Hide 82214B 4.REMOVE REAR LIGHT WIRE

a.
E360917

Disconnect the connector and grommet to remove the rear light wire.