Home › Vehicle Interior › LIGHTING › HEADLIGHT DIMMER SWITCH
RM2850E _58 Vehicle Interior _073208 LIGHTING _0356322 HEADLIGHT DIMMER SWITCH G

LIGHTING  HEADLIGHT DIMMER SWITCH  INSPECTION  


PROCEDURE

Hide 84140 1.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD)

a.

Inspect the light control switch.

i.
E230019E10
2.229,1.135 2.75,1.021 true 2.01,1.438 2.01,1.833 true 1.406,1.448 1.406,1.813 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 2.792,0.917 3.042,1.198 0.25,0.281 10 false EL 1.375,1.865 1.5,2.146 0.125,0.281 10 false T 1.969,1.865 2.177,2.125 0.208,0.26 10 false H

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
13 (T) - 1 (EL) Light control switch off 10 kΩ or higher
9 (H) - 1 (EL)
13 (T) - 1 (EL) Light control switch tail Below 1 Ω
13 (T) - 1 (EL) Light control switch head Below 1 Ω
9 (H) - 1 (EL)


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



b.

Inspect the headlight dimmer switch.

i.
E230019E12
2.031,1.042 2.333,0.521 true 1.865,0.51 1.865,1.052 true 1.698,1.073 1.333,0.5 true 2.219,1.115 2.573,1.115 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 2.635,1.031 2.885,1.313 0.25,0.281 10 false EL 1.76,0.354 2.052,0.552 0.292,0.198 10 false HU 2.375,0.354 2.729,0.563 0.354,0.208 10 false HL 1.167,0.323 1.458,0.521 0.292,0.198 10 false ED

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (HU) - 4 (ED)
4 (ED) - 1 (EL)
Headlight dimmer switch flash Below 1 Ω
2 (HL) - 4 (ED) Headlight dimmer switch low beam Below 1 Ω
3 (HU) - 4 (ED) Headlight dimmer switch hi beam Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



c.

Inspect the turn signal switch.

i.
E230019E11
1.573,1.042 1.667,0.51 true 1.375,1.063 1.052,0.5 true 1.208,1.146 0.813,1.146 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 1.688,0.323 1.938,0.604 0.25,0.281 10 false TR 0.656,1.094 0.927,1.365 0.271,0.271 10 false E 0.865,0.302 1.104,0.5 0.24,0.198 10 false TL

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (TR) - 7 (E) Turn signal switch right turn Below 1 Ω
5 (TR) - 7 (E) Turn signal switch neutral 10 kΩ or higher
6 (TL) - 7 (E)
6 (TL) - 7 (E) Turn signal switch left turn Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



d.

Inspect the fog light switch.

i.
E230019E13
1.896,1.448 2.344,1.875 true 1.896,1.844 1.719,1.448 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 2.302,1.906 2.667,2.104 0.365,0.198 10 false LFG 1.75,1.875 2.229,2.094 0.479,0.219 10 false BFG

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
11 (BFG) - 10 (LFG) Fog light switch off 10 kΩ or higher
11 (BFG) - 10 (LFG) Fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



e.

Inspect the rear fog light switch.

i.
E230019E14
1.896,1.448 2.344,1.875 true 1.438,1.823 1.552,1.448 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 2.302,1.906 2.667,2.104 0.365,0.198 10 false LFG 1.375,1.875 1.854,2.094 0.479,0.219 10 false B

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
12 (B) - 10 (LFG) Rear fog light switch off 10 kΩ or higher
12 (B) - 10 (LFG) Rear fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



Hide 84140 2.INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD)

a.

Inspect the light control switch.

i.
E230019E15
0.792,0.979 1.198,1.135 true 2.01,1.438 2.01,1.833 true 1.406,1.448 1.406,1.813 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 0.604,0.885 0.854,1.167 0.25,0.281 10 false EL 1.375,1.865 1.573,2.083 0.198,0.219 10 false H 1.969,1.865 2.177,2.125 0.208,0.26 10 false T

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
9 (T) - 7 (EL)
13 (H) - 7 (EL)
Light control switch off 10 kΩ or higher
9 (T) - 7 (EL) Light control switch tail Below 1 Ω
9 (T) - 7 (EL)
13 (H) - 7 (EL)
Light control switch head Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



b.

Inspect the headlight dimmer switch.

i.
E230019E16
1.729,1.042 2.031,0.521 true 1.563,0.51 1.563,1.052 true 1.354,1.063 0.99,0.49 true 0.823,1.125 1.177,1.125 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 0.635,1.042 0.885,1.323 0.25,0.281 10 false EL 1.479,0.354 1.771,0.552 0.292,0.198 10 false HU 0.885,0.313 1.24,0.521 0.354,0.208 10 false HL 1.99,0.333 2.281,0.531 0.292,0.198 10 false ED

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (HU) - 4 (ED)
4 (ED) - 7 (EL)
Headlight dimmer switch flash Below 1 Ω
6 (HL) - 4 (ED) Headlight dimmer switch low beam Below 1 Ω
5 (HU) - 4 (ED) Headlight dimmer switch hi beam Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



c.

Inspect the turn signal switch.

i.
E230019E17
2.042,1.042 2.135,0.51 true 1.813,1.052 1.51,0.521 true 2.615,1.125 2.219,1.125 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 2.073,0.313 2.323,0.594 0.25,0.281 10 false TR 2.656,1.042 2.927,1.313 0.271,0.271 10 false E 1.406,0.344 1.646,0.542 0.24,0.198 10 false TL

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (TR) - 1 (E) Turn signal switch right turn Below 1 Ω
2 (TR) - 1 (E)
3 (TL) - 1 (E)
Turn signal switch neutral 10 kΩ or higher
3 (TL) - 1 (E) Turn signal switch left turn Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



d.

Inspect the fog light switch.

i.
E230019E18
1.563,1.458 1.406,1.854 true 1.896,1.844 1.719,1.448 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 1.26,1.885 1.625,2.083 0.365,0.198 10 false LFG 1.75,1.875 2.229,2.094 0.479,0.219 10 false BFG

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
11 (BFG) - 12 (LFG) Fog light switch off 10 kΩ or higher
11 (BFG) - 12 (LFG) Fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)



e.

Inspect the rear fog light switch.

i.
E230019E19
1.896,1.448 2.344,1.875 true 1.438,1.823 1.552,1.448 true 0.063,0 0.313,0.229 0.25,0.229 10 false *a 1.323,1.885 1.688,2.083 0.365,0.198 10 false LFG 2.323,1.885 2.802,2.104 0.479,0.219 10 false B

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
10 (B) - 12 (LFG) Rear fog light switch off 10 kΩ or higher
10 (B) - 12 (LFG) Rear fog light switch on Below 1 Ω


If the result is not as specified, replace the headlight dimmer switch assembly.

Text in Illustration
*a Component without harness connected
(Headlight Dimmer Switch Assembly)