Home › Vehicle Interior › LIGHTING › STOP LIGHT SWITCH
RM2850E _58 Vehicle Interior _073208 LIGHTING _0356325 STOP LIGHT SWITCH G

LIGHTING  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E362568E01
0.146,0.125 0.458,0.323 0.313,0.198 10 false *a 1.833,0.844 2.146,1.042 0.313,0.198 10 false *b

Inspect the stop light switch assembly.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Shaft pushed 10 kΩ or higher
Shaft not pushed Below 1 Ω
3 - 4 Shaft pushed Below 1 Ω
Shaft not pushed 10 kΩ or higher


If the result is not as specified, replace the stop light switch assembly.

Text in Illustration
*a Component without harness connected
(Stop Light Switch Assembly)
*b Shaft not pushed