Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81610F
1.REMOVE CLEARANCE LIGHT BULB
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the clearance light bulb from the bulb socket.
81510D
2.REMOVE FRONT TURN SIGNAL LIGHT BULB
Turn the bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the front turn signal light bulb from the bulb socket.
81110B
3.REMOVE NO. 1 HEADLIGHT BULB
Disconnect the connector.
Turn the No. 1 headlight bulb counterclockwise until it stops and remove the No. 1 headlight bulb.
Do not touch the glass part of the No. 1 headlight bulb.
81110D
4.REMOVE NO. 2 HEADLIGHT BULB
Disconnect the connector.
Turn the No. 2 headlight bulb counterclockwise until it stops and remove the No. 2 headlight bulb.
Do not touch the glass part of the No. 2 headlight bulb.
81210D
5.REMOVE FOG LIGHT BULB (w/ Fog Light)
Disconnect the connector.
Turn the fog light bulb counterclockwise until it stops and remove the fog light bulb.
Do not touch the glass part of the fog light bulb.
81176C
6.REMOVE NO. 1 HEADLIGHT COVER LH
Remove the 2 screws.
Detach the hook to remove the No. 1 headlight cover LH.
81156A
7.REMOVE HEADLIGHT BRACKET LH
Remove the 2 screws and No. 1 gear unit assembly LH.
Use the same procedure to remove the No. 1 gear unit assembly LH on the other side.
Remove the 2 screws and headlight bracket LH.
81138A
8.REMOVE HEADLIGHT SOCKET AND WIRE
w/ Fog Light:
Remove the 2 screws.
Detach the hook to remove the No. 1 headlight cover LH.
Remove the 2 screws and No. 1 gear unit assembly LH.
Use the same procedure to remove the No. 1 gear unit assembly LH on the other side.
Remove the 2 screws and headlight bracket LH.
Turn the clearance light bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the clearance light bulb from the bulb socket.
Turn the front turn signal light bulb socket counterclockwise until the matchmark is aligned with the unlock mark to disconnect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
Remove the front turn signal light bulb from the bulb socket.
w/ Fog Light:
Disconnect the fog light bulb connector.
| *A | w/ Fog Light |
Detach the claw to disconnect the connector.
Detach the wire harness clamp to remove the headlight socket and wire.
81165
9.REMOVE HEADLIGHT CORD LH
Perform this procedure with the headlight socket and wire removed.
Disconnect the wire harness connector leading toward the No. 1 headlight bulb, No. 2 headlight bulb and headlight interior.
Detach the claw to disconnect the connector.
Detach the 3 wire harness clamps to remove the headlight cord LH.