Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81165
1.INSTALL HEADLIGHT CORD LH
Attach the 3 wire harness clamps to set the headlight cord LH.
Attach the claw to connect the connector.
Connect the wire harness connector leading toward the No. 1 headlight bulb, No. 2 headlight bulb and headlight interior.
81138A
2.INSTALL HEADLIGHT SOCKET AND WIRE
Attach the wire harness clamp to set the headlight socket and wire.
Attach the claw to connect the connector.
w/ Fog Light:
Connect the fog light bulb connector.
| *a | w/ Fog Light |
Install the front turn signal light bulb to the bulb socket.
Align the matchmark of the front turn signal light bulb socket to the unlock mark, and then rotate it clockwise until the lock mark to connect the front turn signal light bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
| *c | Lock Mark |
Install the clearance light bulb to the bulb socket.
Align the matchmark of the clearance light bulb socket to the unlock mark, and then rotate it clockwise until the lock mark to connect the clearance light bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
| *c | Lock Mark |
w/ Fog Light:
Install the headlight bracket LH with the 2 screws.
Align the No. 1 gear unit assembly LH cutout and the aiming screw, and then set into place.
| *a | Cutout |
| *b | Aiming Screw |
Use the same procedure to set the No. 1 gear unit assembly LH on the other side.
Install the 2 screws.
Use the same procedure to install the 2 screws on the other side.
Attach the hook to set the No. 1 headlight cover LH.
Install the 2 screws.
81156A
3.INSTALL HEADLIGHT BRACKET LH
Install the headlight bracket LH with the 2 screws.
Align the No. 1 gear unit assembly LH cutout and the aiming screw, and then set into place.
| *a | Cutout |
| *b | Aiming Screw |
Use the same procedure to set the No. 1 gear unit assembly LH on the other side.
Install the 2 screws.
Use the same procedure to install the 2 screws on the other side.
81176C
4.INSTALL NO. 1 HEADLIGHT COVER LH
Attach the hook to set the No. 1 headlight cover LH.
Install the 2 screws.
81210D
5.INSTALL FOG LIGHT BULB (w/ Fog Light)
Set the fog light bulb into place and turn the fog light bulb clockwise to install it.
Do not touch the glass part of the fog light bulb.
Connect the connector.
81110D
6.INSTALL NO. 2 HEADLIGHT BULB
Set the No. 2 headlight bulb into place and turn the No. 2 headlight bulb clockwise to install it.
Do not touch the glass part of the No. 2 headlight bulb.
Connect the connector.
81110B
7.INSTALL NO. 1 HEADLIGHT BULB
Set the No. 1 headlight bulb into place and turn the No. 1 headlight bulb clockwise to install it.
Do not touch the glass part of the No. 1 headlight bulb.
Connect the connector.
81510D
8.INSTALL FRONT TURN SIGNAL LIGHT BULB
Install the front turn signal light bulb to the bulb socket.
Align the matchmark of the bulb socket to the unlock mark, and then rotate it clockwise until the lock mark to connect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
| *c | Lock Mark |
81610F
9.INSTALL CLEARANCE LIGHT BULB
Install the clearance light bulb to the bulb socket.
Align the matchmark of the bulb socket to the unlock mark, and then rotate it clockwise until the lock mark to connect the bulb socket.
| *a | Matchmark |
| *b | Unlock Mark |
| *c | Lock Mark |