Home › Vehicle Interior › LIGHTING › ROOM LIGHT ASSEMBLY(for Roof Side)
RM2850E _58 Vehicle Interior _073208 LIGHTING _0356334 ROOM LIGHT ASSEMBLY(for Roof Side) A

LIGHTING  ROOM LIGHT ASSEMBLY(for Roof Side)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the front, center and rear sides.

·

The procedure listed below is for the front side.



PROCEDURE

Hide 81240J 1.REMOVE ROOM LIGHT ASSEMBLY

a.
E360946

Insert moulding remover D between the room light assembly and roof headlining.


b.

Pull moulding remover D downward to detach the clip.


c.
E360947

Use the same procedure to detach the remaining clip and remove the room light assembly.

NOTICE:

Support the room light assembly with your hand so as not to drop it when detaching the 3rd clip.



d.
E360949

Disconnect the connector.