84233
1.INSPECT FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY
Inspect the front door courtesy light switch assembly.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 1 - Switch body | Shaft not pushed | Below 1 Ω |
| Shaft pushed | 10 kΩ or higher |
Connect the negative (-) tester lead near the bolt hole.
If the result is not as specified, replace the front door courtesy light switch assembly.
| *a | Component without harness connected
(Front Door Courtesy Light Switch Assembly) |