Use the same procedure for RHD and LHD vehicles.
The procedure listed below are for RHD vehicles.
1.INSPECT FRONT WIPER MOTOR
for LH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assembly operation.
Check the automatic stop (park) position.
| *a | Ceramic Line |
| *b | 10 mm (0.394 in.) |
After the front wiper motor is stopped, check the automatic stop position after lifting the wiper blade 2 times.
The front wiper stops at the position shown in the illustration.
for RH Side:
Operate the windshield wiper motor assembly.
Stop the windshield wiper motor assemblyoperation.
Check the automatic stop (park) position.
| *a | Ceramic Line |
| *b | 10 mm (0.394 in.) |
| *c | 30 mm (1.181 in.) |
After the front wiper motor is stopped, check the automatic stop position after lifting the wiperblade 2 times.
The front wiper stops at the position shown in the illustration.