85070
1.INSPECT FRONT WIPER MOTOR AND BRACKET ASSEMBLY (for LHD)
Check the LO operation.
Apply battery voltage to the front wiper motor and bracket assembly connector and check the speed of the front wiper motor and bracket assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 1 (+1)
Battery negative (-) → Terminal 5 (E) |
Motor operates at low speed |
If the result is not as specified, replace the front wiper motor and bracket assembly.
Check the HI operation.
Apply battery voltage to the front wiper motor and bracket assembly connector and check the speed of the front wiper motor and bracket assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4 (+2)
Battery negative (-) → Terminal 5 (E) |
Motor operates at high speed |
If the result is not as specified, replace the front wiper motor and bracket assembly.
| *a | Component without harness connected
(Front Wiper Motor and Bracket Assembly) |
85070
2.INSPECT FRONT WIPER MOTOR AND BRACKET ASSEMBLY (for RHD)
Check the LO operation.
Apply battery voltage to the front wiper motor and bracket assembly connector and check the speed of the front wiper motor and bracket assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 5 (+1)
Battery negative (-) → Terminal 4 (E) |
Motor operates at low speed |
If the result is not as specified, replace the front wiper motor and bracket assembly.
Check the HI operation.
Apply battery voltage to the front wiper motor and bracket assembly connector and check the speed of the front wiper motor and bracket assembly.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 3 (+2)
Battery negative (-) → Terminal 4 (E) |
Motor operates at high speed |
If the result is not as specified, replace the front wiper motor and bracket assembly.
| *a | Component without harness connected
(Front Wiper Motor and Bracket Assembly) |