85192R
1.REMOVE REAR WIPER ARM COVER
Using a thin-bladed screwdriver, detach the 2 claws to remove the rear wiper arm cover.
Tape the thin-bladed screwdriver tip before use.
| *a | Protective Tape |
2.REMOVE REAR WIPER ARM AND BLADE ASSEMBLY
Remove the nut and rear wiper arm and blade assembly.
85143R
3.REMOVE REAR WIPER MOTOR GROMMET
Remove the rear wiper motor grommet.
64735A
4.REMOVE CENTER BACK RAIL INNER GARNISH
85110R
5.REMOVE REAR WIPER MOTOR ASSEMBLY
Disconnect the connector and detach the clamp.
Loosen the 3 bolts and remove the rear wiper motor assembly.
|
Bolt |
|
Connector |