Use the same procedure for RHD and LHD vehicles.
The procedure listed below are for RHD vehicles.
85310
1.INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.
Pour washer fluid into the windshield washer jar assembly with the windshield washer motor and pump assembly installed to the windshield washer jar assembly.
Check that the washer fluid is pumped when battery voltage is applied to the terminals.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) - Terminal 2
Battery negative (-) - Terminal 1 |
Washer fluid is pumped |
| *a | Component without harness connected
(Windshield Washer Motor and Pump Assembly) |
If the result is not as specified, replace the windshield washer motor and pump assembly.