Use the same procedure for RHD and LHD vehicles.
The procedure listed below are for RHD vehicles.
1.DRAIN WINDSHIELD WASHER FLUID
Prepare a container before performing the procedure.
Disconnect the washer hose and drain the windshield washer fluid.
85330
2.REMOVE WINDSHIELD WASHER JAR ASSEMBLY
Remove the 2 cable ties and disconnect the wire harness and washer hose.
Disconnect the connector.
Detach the claw and pull out the windshield washer jar assembly as shown in the illustration.
85310
3.REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY
Remove the screw and the windshield washer motor and pump assembly.
Remove the windshield washer motor and pump assembly.
85332
4.REMOVE WINDSHIELD WASHER JAR CAP
Remove the windshield washer jar cap.