85310R
1.INSPECT REAR WASHER MOTOR ASSEMBLY
This check should be performed with the rear washer motor assembly installed to the rear washer jar assembly.
Pour washer fluid into the rear washer jar assembly with the rear washer motor assembly installed to the rear washer jar assembly.
Check that the washer fluid is pumped when battery voltage is applied to the terminals.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) - Terminal 1
Battery negative (-) - Terminal 2 |
Washer fluid is pumped |
| *a | Component without harness connected
(Rear Washer Motor Assembly) |
If the result is not as specified, replace the rear washer motor assembly.