82641
1.INSPECT NO.1 INTEGRATION RELAY
Measure the voltage according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| J69-6 (+B) - Body ground | Always | 11 to 14 V |
| J68-1 (IG) - Body ground | Ignition switch off → Ignition switch ON | 1 V or less → 11 to 14 V |
| J69-1 (WF) - Body ground | Ignition switch ON, washer switch off → on | 11 to 14 V → 1 V or less |
| J69-2 (+2) - Body ground | Ignition switch ON, wiper switch off → HI | 1 V or less → 11 to 14 V |
| J69-5 (+1) - Body ground | Ignition switch ON, wiper switch off → LO | 1 V or less → 11 to 14 V |
| J68-6 (PA2) - Body ground | Ignition switch ON, front wiper switch other than HI → HI | 4.3 V or more → 1 V or less |
| J68-7 (PA1) - Body ground | Ignition switch ON, front wiper switch other than LO → LO | 4.3 V or more → 1 V or less |
| J68-8 (SPD) - Body ground | Ignition switch ON, front wiper switch other than INT → INT | 4.3 V or more → 1 V or less |
| J68-11 (+S) - Body ground | Front wiper motor stopped (retracted position) → operating (any position other than retracted position) | 1 V or less → 5.5 V or more |
| J68-12 (WU) - Body ground | Ignition switch ON, washer switch off → on | 4.3 V or more → 1 V or less |
| *a | Component with harness connected
(No. 1 Integration Relay) |