Home › Vehicle Interior › ENGINE HOOD / DOOR › LUGGAGE COMPARTMENT DOOR
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0356360 LUGGAGE COMPARTMENT DOOR N

ENGINE HOOD / DOOR  LUGGAGE COMPARTMENT DOOR  ADJUSTMENT  


PROCEDURE

Hide 67005 1.INSPECT BACK DOOR PANEL SUB-ASSEMBLY

a.

Check that the clearance measurements of areas A to H are within the standard range.

B466937E01
3.885,0.813 4.146,1.063 0.26,0.25 10 false A 3.604,1.354 3.865,1.604 0.26,0.25 10 false B 5.49,1.844 5.75,2.094 0.26,0.25 10 false C 4.948,1.604 5.208,1.854 0.26,0.25 10 false D 1.51,2.271 1.771,2.521 0.26,0.25 10 false E 2.073,2.094 2.333,2.344 0.26,0.25 10 false F 2.25,3.948 2.51,4.198 0.26,0.25 10 false G 3.75,4.198 4.01,4.448 0.26,0.25 10 false H

Standard:
Area Specified Condition Area Specified Condition
A 4.5 to 7.5 mm (0.177 to 0.296 in.) B -1.5 to 1.5 mm (-0.059 to 0.059 in.)
C 4.5 to 7.5 mm (0.177 to 0.296 in.) D -1.5 to 1.5 mm (-0.059 to 0.059 in.)
E 4.5 to 7.5 mm (0.177 to 0.296 in.) F -1.5 to 1.5 mm (-0.059 to 0.059 in.)
G 7.2 to 12.2 mm (0.283 to 0.480 in.) H 7.5 to 12.5 mm (0.295 to 0.492 in.)



Hide 67005 2.ADJUST BACK DOOR PANEL SUB-ASSEMBLY

B466945

a.

Loosen the body side bolt and adjust the front and rear and horizontal axis of the door.


b.

Tighten the body side bolt on the body after the adjustment.

Torque:

28 N*m (286 kgf*cm, 21 ft.*lbf)



c.

Loosen the door side bolt and adjust the vertical axis of the door and the horizontal axis for the top of the door.


d.

Tighten the door side bolt on the body after the adjustment.


e.

Loosen the back door lock striker bolt and adjust the back door lock striker and the horizontal axis for the bottom of the door.


f.

Tighten the back door lock striker bolt on the body after the adjustment.

Torque:

7.5 N*m (76 kgf*cm, 66 in.*lbf)