77030A
1.INSPECT FUEL LID W/ MOTOR LOCK ASSEMBLY
Measure the shaft stroke.
| Area | Specified Condition |
|---|---|
| A | 9.9 mm (0.390 in.) |
Check the operation of the fuel lid with lock motor assembly.
Apply battery voltage to the fuel lid with motor lock assembly connector, and check that the fuel lid with motor lock assembly operates smoothly as follows.
| Measurement ConditionArea | Specified Condition |
|---|---|
| Battery positive (+) - Terminal 2
Battery negative (-) - Terminal 1 |
Operate |
| *a | Component without harness connected
(Fuel Lid with Motor Lock Assembly) |
If the result is not as specified, replace the fuel lid with motor lock assembly.