Home › Vehicle Interior › ENGINE HOOD / DOOR › CENTER DOOR (for Folding Type) › 2017.01–2019.08
RM2850E _58 Vehicle Interior _073213 ENGINE HOOD / DOOR _0356366 CENTER DOOR(for Folding Type) A

ENGINE HOOD / DOOR  CENTER DOOR(for Folding Type)  REASSEMBLY  


PROCEDURE

Hide 1.APPLY BODY GREASE

a.

Apply body grease to sliding sections of the lock, etc.


Hide 67857D 2.INSTALL CENTER DOOR CENTER WEATHERSTRIP

Hide 67856C 3.INSTALL CENTER DOOR REAR WEATHERSTRIP

Hide 67855C 4.INSTALL CENTER DOOR FRONT WEATHERSTRIP

Hide 69068A 5.INSTALL NO. 2 CENTER DOOR REMOTE CONTROL CABLE SUB-ASSEMBLY

a.
B333450

Install the No. 2 center door remote control cable sub-assembly with the 2 bolts.


Hide 68705 6.INSTALL OUTER NO. 1 CENTER DOOR HINGE SUB-ASSEMBLY

a.
B333449E02
2.979,1 2.771,0.615 true 2.677,2.667 3.052,2.198 3.052,2.198 2.677,1.76 true 2.979,1.01 3.292,1.208 0.313,0.198 10 false *1 3.083,2.125 3.396,2.323 0.313,0.198 10 false *2

Install the outer No. 1 center door hinge sub-assembly, 2 outer No. 2 center door hinge sub-assemblies and 3 center door hinge spacers with the 12 screws.

Text in Illustration
*1 Outer No. 1 Center Door Hinge Sub-assembly
*2 Outer No. 2 Center Door Hinge Sub-assembly


Hide 7.INSTALL CUSHION

a.
B333448

Engage the 2 claws and install the 2 cushions.


Hide 8.INSTALL NO. 2 DOOR CUSHION GUM

a.
B333447

Engage the claw and install the No. 2 door cushion gum.


Hide 67087 9.INSTALL CENTER DOOR FRONT DUST SEAL PLATE SUB-ASSEMBLY

a.
B333446

Install the center door front dust seal plate sub-assembly with the 3 clips.


Hide 67088 10.INSTALL CENTER DOOR REAR DUST SEAL PLATE SUB-ASSEMBLY

HINT:

Use the same procedure as for the center door front dust seal plate sub-assembly.


Hide 67254 11.INSTALL NO. 1 CENTER DOOR INSIDE STOPPER

a.
B333445

Install the No. 1 center door inside stopper and stopper plate with the 6 bolts and 2 screws.


Hide 69303B 12.INSTALL CENTER DOOR LOCK OUTSIDE HANDLE SUB-ASSEMBLY

a.

Apply MP grease to the center door lock outside handle sub-assembly.


b.
B333444

Install the center door lock outside handle sub-assembly with the screw.


Hide 69302B 13.INSTALL CENTER DOOR INSIDE HANDLE LOCK SUB-ASSEMBLY

a.

Apply MP grease to the sliding parts of the center door inside handle lock sub-assembly.


b.
B333451

Engage the No. 2 center door remote control cable sub-assembly to install the center door inside handle lock sub-assembly.


c.
B333452

Engage the 2 guides as shown in the illustration.


d.
B333441

Tighten the 3 screws.


e.
B333440

Tighten the 2 bolts.


Hide 69278 14.INSTALL NO. 1 DOOR INSIDE HANDLE BEZEL LH

a.
B333439

Engage the 2 clips and install the No. 1 door inside handle bezel LH.


b.

Install the clip.


Hide 69298F 15.INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH

a.
B333438

Engage the guide and 5 clips to install the No. 2 door inside handle bezel LH.


b.

Install the clip.


Hide 74642 16.INSTALL FOLDING DOOR ASSIST GRIP

a.
B333437

Install the folding door assist grip with the 2 screws.