69608A
1.REMOVE CENTER DOOR REMOTE CONTROL LINK SUB-ASSEMBLY
Remove the No. 1 power folding door pin, No. 2 power folding door pin and center door remote control link sub-assembly.
| *1 | No. 1 Power Folding Door Pin |
| *2 | No. 2 Power Folding Door Pin |
84934A
2.REMOVE DOOR CONTROL SWITCH COVER
Remove the 5 clips and the door control switch cover.
85623
3.REMOVE AUTOMATIC DOOR REGULATOR LINK
Remove the nut, automatic door regulator link and grommet.
87116D
4.REMOVE HOLDING SPRING
Remove the holding spring.
86650D
5.REMOVE BUZZER ASSEMBLY
Disconnect the connector, disengage the clamp and remove the buzzer assembly.
85639A
6.REMOVE NO. 1 AUTO DOOR STOPPER CAM
Disconnect the connector and disengage the clamp.
Remove the bolt and No. 1 auto door stopper cam.
Remove the screw and disengage the clamp and remove the switch harness.
89136A
7.REMOVE NO. 1 ECU AGGREGATION COVER
Remove the 3 nuts and No. 1 ECU aggregation cover.
85980B
8.REMOVE AUTOMATIC DOOR CONTROL RELAY ASSEMBLY
84962
9.REMOVE POWER SLIDE DOOR MAIN SWITCH
85621
10.REMOVE AUTOMATIC DOOR REGULATOR MOTOR AND LINK
Using "TORX" socket wrench T25, remove the 5 screws.
Disconnect the wire harness to remove theautomatic door regulator motor and link.
85622
11.REMOVE AUTOMATIC DOOR REGULATOR MOTOR AND GEAR
Disconnect the connector and remove the wire harness.
Remove the 3 bolts and automatic door regulator motor and gear.