85622
1.INSTALL AUTOMATIC DOOR REGULATOR MOTOR AND GEAR
Install the automatic door regulator motor and gear with the new 3 bolts.
Connect the connector and install the wire harness.
85621
2.INSTALL AUTOMATIC DOOR REGULATOR MOTOR AND LINK
Connect the wire harness.
Using "TORX" socket wrench T25, install the automatic door regulator motor and link with the new 5 screws.
84962
3.INSTALL POWER SLIDE DOOR MAIN SWITCH
85980B
4.INSTALL AUTOMATIC DOOR CONTROL RELAY ASSEMBLY
89136A
5.INSTALL NO. 1 ECU AGGREGATION COVER
Install the No. 1 ECU aggregation cover with the 3 nuts.
85639A
6.INSTALL NO. 1 AUTO DOOR STOPPER CAM
Engage the clamp and install the switch harness with the new screw.
Install the No. 1 auto door stopper cam with the new bolt.
Connect the connector and engage the clamp.
86650D
7.INSTALL BUZZER ASSEMBLY
Connect the connector and engage the clamp to install the buzzer assembly.
87116D
8.INSTALL HOLDING SPRING
Install the holding spring.
85623
9.INSTALL AUTOMATIC DOOR REGULATOR LINK
Attach the automatic door regulator link while aligning its position as shown in the illustration.
Install the automatic door regulator link and grommet with the new nut.
84934A
10.INSTALL DOOR CONTROL SWITCH COVER
Install the door control switch cover with the new 5 clips.
69608A
11.INSTALL CENTER DOOR REMOTE CONTROL LINK SUB-ASSEMBLY
Install the No. 1 power folding door pin, No. 2 power folding door pin and center door remote control link sub-assembly.
| *1 | No. 1 Power Folding Door Pin |
| *2 | No. 2 Power Folding Door Pin |