84841A
1.INSPECT FUEL LID OPENER SWITCH
Check the resistance.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 4 (B) - 1 (L) | Switch released (OFF) | 10 kΩ or higher |
| 4 (B) - 1 (L) | Switch pressed in (ON) | Below 1 Ω |
| *a | Component without harness connected
(Fuel lid opener switch) |
If the result is not as specified, replace the fuel lid opener switch.