85610A
1.INSTALL ACCEL INTER LOCK ACTUATOR ASSEMBLY
Install the 6 bolts to the accel inter lock actuator assembly.
Connect the connector and Attach the clamp.
|
Connector |
|
Clamp |
With the ignition switch ON, close the center door and release the accelerator interlock.
Turn the ignition switch off.
After checking the accelerator pedal play and gaps between the stopper bolt, check that the accelerator pedal moves smoothly.
Check that the throttle cable returns completely.
| Measurement Location | Dimension | |
|---|---|---|
| A | Accelerator Pedal Play | 1.0 to 4.0 mm |
| B | Stopper Bolt Gap | 0 to 2.0 mm |