52119A
1.REMOVE FRONT BUMPER COVER (w/o Snorkel Air Cleaner)
52119A
2.REMOVE FRONT BUMPER COVER (w/ Snorkel Air Cleaner)
75311
3.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Detach the guide and 3 claws and remove the radiator grille (or front panel) emblem.
75431A
4.REMOVE NO. 1 BACK DOOR EMBLEM (for Double Swing Out Type)
When removing the No. 1 back door emblem, heat the back door and No. 1 back door emblem using a heat light.
| Item | Temperature |
|---|---|
| Back Door | 40 to 60°C (104 to 140°F) |
| No.1 Back Door Emblem | 20 to 30°C (68 to 86°F) |
Do not heat the back door and No. 1 back door emblem excessively.
Apply protective tape around the No. 1 back door emblem.
| *a | Wooden Block |
| *b | Boss |
|
Protective Tape |
Insert a piano wire between the back door and No. 1 back door emblem.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the No. 1 back door emblem to the back door.
Be careful not to damage the back door excessively.
Remove the No. 1 back door emblem.
75431A
5.REMOVE NO. 1 BACK DOOR EMBLEM (for Luggage Compartment)
Use the same procedure described for the double swing out type.
75471B
6.REMOVE NO. 1 REAR BODY NAME PLATE (for Luggage Compartment)
When removing the No. 1 rear body name plate, heat the luggage compartment door and No. 1 rear body name plate using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door | 40 to 60°C (104 to 140°F) |
| No. 1 Rear Body Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the luggage compartment door or No. 1 rear body name plate excessively.
Heat the luggage compartment door surface and No. 1 rear body name plate using a heat light.
Pull back an edge of the No. 1 rear body name plate and pull it parallel to the luggage compartment door to remove it.
75471B
7.REMOVE NO. 1 REAR BODY NAME PLATE (for Double Swing Out Type)
When removing the No. 1 rear body name plate, heat the back door and No. 1 rear body name plate using a heat light.
| Item | Temperature |
|---|---|
| Back Door | 40 to 60°C (104 to 140°F) |
| No. 1 Rear Body Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the back door or No. 1 rear body name plate excessively.
Heat the back door surface and No. 1 rear body name plate using a heat light.
Pull back an edge of the No. 1 rear body name plate and pull it parallel to the back door to remove it.
75472A
8.REMOVE NO. 2 REAR BODY NAME PLATE (for Luggage Compartment)
When removing the No. 2 rear body name plate, heat the luggage compartment door and No. 2 rear body name plate using a heat light.
| Item | Temperature |
|---|---|
| Luggage Compartment Door | 40 to 60°C (104 to 140°F) |
| No. 2 Rear Body Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the luggage compartment door or No. 2 rear body name plate excessively.
Heat the luggage compartment door surface and No. 2 rear body name plate using a heat light.
Pull back an edge of the No. 2 rear body name plate and pull it parallel to the luggage compartment door to remove it.
75472A
9.REMOVE NO. 2 REAR BODY NAME PLATE (for Double Swing Out Type)
When removing the No. 2 rear body name plate, heat the back door and No. 2 rear body name plate using a heat light.
| Item | Temperature |
|---|---|
| Back Door | 40 to 60°C (104 to 140°F) |
| No. 2 Rear Body Name Plate | 20 to 30°C (68 to 86°F) |
Do not heat the back door or No. 2 rear body name plate excessively.
Heat the back door surface and No. 2 rear body name plate using a heat light.
Pull back an edge of the No. 2 rear body name plate and pull it parallel to the back door to remove it.