Home › Vehicle Interior › EXTERIOR › BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type)
RM2850E _58 Vehicle Interior _073214 EXTERIOR _0356386 BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type) A

EXTERIOR  BACK DOOR OUTSIDE GARNISH(for Double Swing Out Type)  REMOVAL  


PROCEDURE

Hide 68931 3.REMOVE BACK DOOR STAY NO.1 (w/ No. 1 Back Door Stay)

Hide 69278D 4.REMOVE DOOR INSIDE HANDLE BEZEL LH (for Double Swing Out Type)

Hide 64790C 5.REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH (for Double Swing Out Type)

Hide 64790C 6.REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH (for Emergency Door)

Hide 67848 7.REMOVE BACK DOOR SERVICE HOLE COVER LH

Hide 69291 8.REMOVE BACK DOOR INSIDE HANDLE ASSEMBLY (for Double Swing Out Type)

Hide 76811A 9.REMOVE BACK DOOR OUTSIDE GARNISH

a.
B460175

Disconnect the connector and remove the 4 nuts.


b.
B460170

w/ Rear View Monitor

i.

Disconnect the connector.



c.
B460174

Place your hand at the position shown in the illustration, detach the 2 clips and remove the back door outside garnish.

Text in Illustration
V113146

Place Hands Here


d.

Disconnect the grommet from the Vehicle.