Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
75992C
1.REMOVE QUARTER STRIPE LH
When removing the quarter stripe LH, heat the vehicle body and quarter stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Quarter Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the quarter stripe LH and pull it parallel to the vehicle body to remove it.
75991C
2.REMOVE QUARTER STRIPE RH
When removing the quarter stripe RH, heat the vehicle body and quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the quarter stripe RH and pull it parallel to the vehicle body to remove it.
75941B
3.REMOVE NO. 1 CENTER PILLAR STRIPE
When removing the No. 1 center pillar stripe, heat the vehicle body and No. 1 center pillar stripe.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| No. 1 Center Pillar Stripe | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the No. 1 center pillar stripe and pull it parallel to the vehicle body to remove it.
75942
4.REMOVE NO. 2 CENTER PILLAR STRIPE
When removing the No. 2 center pillar stripe, heat the vehicle body and No. 2 center pillar stripe.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| No. 2 Center Pillar Stripe | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the No. 2 center pillar stripe and pull it parallel to the vehicle body to remove it.
75999G
5.REMOVE LOWER QUARTER STRIPE
When removing the lower quarter stripe, heat the vehicle body and lower quarter stripe.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Lower Quarter Stripe | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the lower quarter stripe and pull it parallel to the vehicle body to remove it.
75991F
6.REMOVE LOWER QUARTER STRIPE RH
When removing the lower quarter stripe RH, heat the vehicle body and lower quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Lower Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the lower quarter stripe RH and pull it parallel to the vehicle body to remove it.