63086A
1.REMOVE ROOF VENTILATOR LOUVER SUB-ASSEMBLY LH
Apply protective tape around the roof ventilator louver sub-assembly LH.
Using clip remover D, detach the 13 clips and remove the roof ventilator louver sub-assembly LH.
|
Protective Tape |
63085A
2.REMOVE ROOF VENTILATOR LOUVER SUB-ASSEMBLY RH
Apply protective tape around the roof ventilator louver sub-assembly RH.
Place your hand at the position shown in the illustration, detach the 13 clips and remove the roof ventilator louver sub-assembly RH.
|
Place Hands Here |
|
Protective Tape |