63874
1.REMOVE ROOF VENTILATOR MOULDING LH
Using a heat light, heat the roof ventilator moulding LH.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| Roof Ventilator Moulding LH |
Do not heat the roof ventilator louver sub-assembly LH or roof ventilator moulding LH excessively.
Remove the roof ventilator moulding LH.
63873
2.REMOVE ROOF VENTILATOR MOULDING RH
Use the same procedure described for the LH side.
3.REMOVE NO. 1 ROOF VENTILATOR PAD LH
Using a heat light, heat the No. 1 roof ventilator pad LH.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| No. 1 Roof Ventilator Pad LH |
Do not heat the roof ventilator louver sub-assembly LH or No. 1 roof ventilator pad LH excessively.
Remove the No. 1 roof ventilator pad LH.
4.REMOVE NO. 1 ROOF VENTILATOR PAD RH
Use the same procedure described for the LH side.
5.REMOVE NO. 2 ROOF VENTILATOR PAD LH
Using a heat light, heat the No. 2 roof ventilator pad LH.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| No. 2 Roof Ventilator Pad LH |
Do not heat the roof ventilator louver sub-assembly LH or No. 2 roof ventilator pad LH excessively.
Remove the No. 2 roof ventilator pad LH.
6.REMOVE NO. 2 ROOF VENTILATOR PAD RH
Use the same procedure described for the LH side.
55789E
7.REMOVE COWL TOP VENTILATOR LOUVER PROTECTOR LH
Using a heat light, heat the cowl top ventilator louver protector LH.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| Cowl top Ventilator Louver Protector LH |
Do not heat the roof ventilator louver sub-assembly LH or cowl top ventilator louver protector LH excessively.
Remove the cowl top ventilator louver protector LH.
55788C
8.REMOVE COWL TOP VENTILATOR LOUVER PROTECTOR RH
Use the same procedure described for the LH side.
9.REMOVE NO. 3 ROOF VENTILATOR PAD LH
Using a heat light, heat the No. 3 roof ventilator pad LH.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly LH | 20 to 30°C (68 to 86°F) |
| No. 3 Roof Ventilator Pad LH |
Do not heat the roof ventilator louver sub-assembly LH or No. 3 roof ventilator pad LH excessively.
Remove the No. 3 roof ventilator pad LH.
10.REMOVE NO. 3 ROOF VENTILATOR PAD RH
Use the same procedure described for the LH side.
63812
11.REMOVE NO. 4 ROOF VENTILATOR PAD
Using a heat light, heat the No. 4 roof ventilator pad.
| Item | Temperature |
|---|---|
| Roof Ventilator Louver Sub-assembly RH | 20 to 30°C (68 to 86°F) |
| No. 4 Roof Ventilator Pad |
Do not heat the roof ventilator louver sub-assembly RH or No. 4 roof ventilator pad excessively.
Remove the No. 4 roof ventilator pad.