Home › Vehicle Interior › EXTERIOR › BACK STEP
RM2850E _58 Vehicle Interior _073214 EXTERIOR _0356391 BACK STEP A

EXTERIOR  BACK STEP  DISASSEMBLY  


PROCEDURE

Hide 52303 1.REMOVE BACK STEP MEMBER SUB-ASSEMBLY

a.
B466070

Remove the 4 nuts.


b.
B466071

Remove the 4 bolts and back step member sub-assembly.


Hide 52034A 2.REMOVE BACK STEP HINGE SUB-ASSEMBLY LH

a.
B466072

Remove the 2 bolts and back step hinge sub-assembly LH.


Hide 52033 3.REMOVE BACK STEP HINGE SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52036 4.REMOVE BACK STEP STAY SUB-ASSEMBLY LH

a.
B466073

Remove the bolt, 3 washers and back step stay sub-assembly LH.


Hide 52035 5.REMOVE BACK STEP STAY SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52304 6.REMOVE BACK STEP LOCK SUB-ASSEMBLY

a.
B466074

Remove the 2 screws, 2 nuts and back step lock sub-assembly.


Hide 52356 7.REMOVE REAR BUMPER STEP CUSHION

a.
B466075

Turn the rear bumper step cushion in the direction shown in the illustration and remove it.