52356
1.INSTALL REAR BUMPER STEP CUSHION
Turn the rear bumper step cushion in the direction shown in the illustration and install it.
52304
2.INSTALL BACK STEP LOCK SUB-ASSEMBLY
Install the back step lock sub-assembly with the 2 screws and 2 nuts.
5.5 N*m (55 kgf*cm, 56 in.*lbf)
52036
3.INSTALL BACK STEP STAY SUB-ASSEMBLY LH
Install the back step stay sub-assembly LH with the bolt and 3 washers.
19.5 N*m (199 kgf*cm, 14 ft.*lbf)
52035
4.INSTALL BACK STEP STAY SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
52034A
5.INSTALL BACK STEP HINGE SUB-ASSEMBLY LH
Install the back step hinge sub-assembly LH with the 2 bolts.
19.5 N*m (199 kgf*cm, 14 ft.*lbf)
52033
6.INSTALL BACK STEP HINGE SUB-ASSEMBLY RH
Use the same procedure described for the LH side.
52303
7.INSTALL BACK STEP MEMBER SUB-ASSEMBLY
Install the back step member sub-assembly with the 4 bolts and 4 nuts.
19.5 N*m (199 kgf*cm, 14 ft.*lbf)