Home › Vehicle Interior › EXTERIOR › BACK STEP
RM2850E _58 Vehicle Interior _073214 EXTERIOR _0356391 BACK STEP A

EXTERIOR  BACK STEP  INSTALLATION  


PROCEDURE

Hide 52306 1.INSTALL UPPER REAR BUMPER RETAINER SUB-ASSEMBLY LH

a.

Install the upper rear bumper retainer sub-assembly LH with the 2 bolts.

Torque:

31 N*m (316 kgf*cm, 23 ft.*lbf)



Hide 52305 2.INSTALL UPPER REAR BUMPER RETAINER SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 52302 3.INSTALL BACK STEP SUB-ASSEMBLY

a.
B460164

Place the guide in the direction indicated by the arrow shown in the illustration and install the back step sub-assembly with the 2 bolts and 2 nuts.

Torque:
for Nuts:

14 N*m (143 kgf*cm, 10 ft.*lbf)

for Bolts:

19.5 N*m (199 kgf*cm, 14 ft.*lbf)



Hide 4.INSTALL REAR BUMPER COVER (for Step)