Use the same procedure for the RHD vehicle and LHD vehicle.
The procedure listed below is for the RHD vehicle.
52119A
1.REMOVE FRONT BUMPER COVER (w/o Snorkel Air Cleaner)
52119A
2.REMOVE FRONT BUMPER COVER (w/ Snorkel Air Cleaner)
75985
3.REMOVE FRONT DOOR STRIPE RH
When removing the front door stripe RH, heat the vehicle body and front door stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Front Door Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the front door stripe RH and pull it parallel to the vehicle body to remove it.
| *1 | Tab Tape |
75982D
4.REMOVE FENDER STRIPE LH (for Front Side)
When removing the fender stripe LH, heat the vehicle body and fender stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Fender Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
for Front Side:
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
| *1 | Tab Tape |
for Rear Side:
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
| *1 | Fender Stripe LH |
75982B
5.REMOVE FENDER STRIPE LH
When removing the fender stripe LH, heat the vehicle body and fender stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Fender Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
75981B
6.REMOVE FENDER STRIPE RH (for Front Side)
When removing the fender stripe RH, heat the vehicle body and fender stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Fender Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the fender stripe RH and pull it parallel to the vehicle body to remove it.
81740
7.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
81590
8.REMOVE REFLEX SIDE REFLECTOR ASSEMBLY LH
59401
9.REMOVE COOLER CONDENSER COVER SUB-ASSEMBLY
75973F
10.REMOVE FRONT SIDE PANEL STRIPE RH
When removing the front side panel stripe RH, heat the vehicle body and front side panel stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Front Side Panel Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the front side panel stripe RH and pull it parallel to the vehicle body to remove it.
75974E
11.REMOVE FRONT SIDE PANEL STRIPE LH
When removing the front side panel stripe LH, heat the vehicle body and front side panel stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Front Side Panel Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the front side panel stripe LH and pull it parallel to the vehicle body to remove it.
75996F
12.REMOVE UPPER QUARTER STRIPE RH
When removing the upper quarter stripe RH, heat the vehicle body and upper quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Upper Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the upper quarter stripe RH and pull it parallel to the vehicle body to remove it.
75991F
13.REMOVE LOWER QUARTER STRIPE RH
When removing the lower quarter stripe RH, heat the vehicle body and lower quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Lower Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the lower quarter stripe RH and pull it parallel to the vehicle body to remove it.
75993A
14.REMOVE REAR QUARTER STRIPE RH
When removing the rear quarter stripe RH, heat the vehicle body and rear quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Rear Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the rear quarter stripe RH and pull it parallel to the vehicle body to remove it.
75981B
15.REMOVE FENDER STRIPE RH (for Rear Side)
When removing the fender stripe RH, heat the vehicle body and fender stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Fender Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Front Side:
Pull back an edge of the fender stripe RH and pull it parallel to the vehicle body to remove it.
| *1 | Fender Stripe RH |
Rear Side:
Pull back an edge of the fender stripe RH and pull it parallel to the vehicle body to remove it.
| *1 | Fender Stripe RH |
75982D
16.REMOVE FENDER STRIPE LH (for Rear Side)
When removing the fender stripe LH, heat the vehicle body and fender stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Fender Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Front Side:
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
| *1 | Fender Stripe RH |
Rear Side:
Pull back an edge of the fender stripe LH and pull it parallel to the vehicle body to remove it.
| *1 | Fender Stripe LH |
75985A
17.REMOVE SIDE PANEL STRIPE RH
When removing the side panel stripe RH, heat the vehicle body and side panel stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Side Panel Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the side panel stripe RH and pull it parallel to the vehicle body to remove it.
75985A
18.REMOVE SIDE PANEL STRIPE RH (for Standard Body)
Use the same procedure described for the LH side.
75986A
19.REMOVE SIDE PANEL STRIPE LH
When removing the side panel stripe LH, heat the vehicle body and side panel stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Side Panel Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the side panel stripe LH and pull it parallel to the vehicle body to remove it.
75986A
20.REMOVE SIDE PANEL STRIPE LH (for Standard Body)
Use the same procedure as for the side panel stripe LH.
52159
21.REMOVE REAR BUMPER COVER
75993A
22.REMOVE REAR QUARTER STRIPE RH
When removing the rear quarter stripe RH, heat the vehicle body and rear quarter stripe RH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| Rear Quarter Stripe RH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the rear quarter stripe RH and pull it parallel to the vehicle body to remove it.
75994
23.REMOVE NO. 2 QUARTER STRIPE LH
When removing the No. 2 quarter stripe LH, heat the vehicle body and No. 2 quarter stripe LH.
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
| No. 2 Quarter Stripe LH | 20 to 30 °C (68 to 86 °F) |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pull back an edge of the No. 2 quarter stripe LH and pull it parallel to the vehicle body to remove it.