Home › Brake › BRAKE SYSTEM (OTHER) › VACUUM PUMP(for 1HZ)
RM2850E _54 Brake _073226 BRAKE SYSTEM (OTHER) _0356447 VACUUM PUMP(for 1HZ) G

BRAKE SYSTEM (OTHER)  VACUUM PUMP(for 1HZ)  INSPECTION  


PROCEDURE

Hide 1.INSPECT BLADE

C397337

a.

Check the blades for wear or damage.


b.

Using a micrometer, measure the height, width and length of the blades.

Minimum height:

16.50 mm (0.6496 in.)


Minimum width:

4.95 mm (0.1949 in.)


Minimum length:

44.96 mm (1.7701 in.)


If necessary, replace the blade.


Hide 2.INSPECT CHECK VALVE OPERATION

C397338

a.

Check that air flows from the hose side to the pump side.


b.

Check that air does not flow from the pump side to the hose side.

If necessary, replace the check valve.


Hide 3.INSPECT INSIDE SURFACE OF CASING

C397356

Inspect the inside surface on the casing for scoring.

If necessary, replace the vacuum pump assembly.