1.INSPECT BLADE
Check the blades for wear or damage.
Using a micrometer, measure the height, width and length of the blades.
16.50 mm (0.6496 in.)
4.95 mm (0.1949 in.)
44.96 mm (1.7701 in.)
If necessary, replace the blade.
2.INSPECT CHECK VALVE OPERATION
Check that air flows from the hose side to the pump side.
Check that air does not flow from the pump side to the hose side.
If necessary, replace the check valve.
3.INSPECT INSIDE SURFACE OF CASING
Inspect the inside surface on the casing for scoring.
If necessary, replace the vacuum pump assembly.