29331A
1.INSPECT VACUUM PUMP VANE
Check the vacuum pump vane for wear or damage.
Using a vernier caliper, measure the dimensions of the vacuum pump blade.
| *a | Height |
| *b | Width |
| *c | Length |
17.90 mm (0.705 in.)
5.80 mm (0.228 in.)
44.97 mm (1.77 in.)
If necessary, replace the vacuum pump vane.
2.INSPECT VACUUM PUMP HOUSING
Check the inside surface of the vacuum pump housing for scoring.
If necessary, replace the vacuum pump assembly.
3.INSPECT CHECK VALVE SUB-ASSEMBLY
Check that air flows from the vacuum pipe side to the vacuum pump side.
| *a | Vacuum Pipe Side |
| *b | Vacuum Pump Side |
|
Air |
Check that air does not flow from the vacuum pump side to the vacuum pipe side.
If necessary, replace the check valve sub-assembly.
29300
4.INSPECT VACUUM PUMP ASSEMBLY
Turn the coupling as shown in the illustration and check that the coupling is not stuck or that there is no abnormal resistance.