1.INSPECT DISASSEMBLED PARTS
Inspect the disassembled parts for wear, rust or damage.
2.INSPECT BRAKE SHOE LINING THICKNESS
10.2 mm (0.402 in.)
4.2 mm (0.165 in.)
If the shoe lining thickness is less than minimum or shows signs of uneven wear, replace the brake shoes.
If any of the brake shoes have to be replaced, replace all of the front brake shoes in order to maintain even braking.
3.INSPECT BRAKE DRUM INSIDE DIAMETER
320.0 mm (12.598 in.)
322.0 mm (12.677 in.)
If the drum is scored or worn, the brake drum may be lathed to the maximum inside diameter.
4.INSPECT BRAKE LINING AND DRUM FOR PROPER
If the contact between the brake lining and drum is improper, repair the lining with a show grinder, replace the brake shoe assembly.