Home › Brake › BRAKE (REAR) › REAR BRAKE
RM2850E _54 Brake _073228 BRAKE (REAR) _0356451 REAR BRAKE G

BRAKE (REAR)  REAR BRAKE  INSPECTION  


PROCEDURE

Hide 1.INSPECT DISASSEMBLED PARTS

Inspect the disassembled parts for wear, rust or damage.

Hide 2.MEASURE BRAKE SHOE LINING THICKNESS

C396455

Standard thickness:

10.2 mm (0.402 in.)


Minimum thickness:

4.2 mm (0.165 in.)


If the shoe lining is less than minimum or shows signs of uneven wear, replace the brake shoes.

HINT:

If any of the brake shoes have to be replaced, replace all of the rear shoes in order to maintain even braking.


Hide 3.MEASURE BRAKE DRUM INSIDE DIAMETER

C396454

Standard inside diameter:

320.0 mm (12.60 ln.)


Maximum inside diameter:

322.0 mm (12.68 in.)


If the drum is scored or worn, the brake drum may be lathed to the maximum inside diameter.

Hide 4.INSPECT REAR BRAKE LINING AND DRUM FOR PROPER CONTACT

C396456

If the contact between the brake lining and drum is improper, repair the lining with a brake shoe grinder, or replace the brake shoe assembly.