Home › Brake › EXHAUST BRAKE › EXHAUST BRAKE MAIN SWITCH
RM2850E _54 Brake _073230 EXHAUST BRAKE _0356456 EXHAUST BRAKE MAIN SWITCH G

EXHAUST BRAKE  EXHAUST BRAKE MAIN SWITCH  INSPECTION  


PROCEDURE

Hide 1.REMOVE CONNECTOR

C397412

Disconnect the 2 connectors and remove the turn signal switch connector from the steering column.

Hide 2.INSPECT SWITCH CONTINUITY

a.
C397413

Check that there is continuity between terminals 11 and 12 with the main switch is "ON".


b.

Check that there is no continuity between terminals 11 and 12 with the main switch is "OFF".


Hide 3.INSTALL CONNECTOR

Install the turn signal switch connector to the steering column and connect the 2 connectors.