Home › Brake › EXHAUST BRAKE › EXHAUST BRAKE RETARDER › 2017.01–2021.01
RM2850E _54 Brake _073230 EXHAUST BRAKE _0356460 EXHAUST BRAKE RETARDER G

EXHAUST BRAKE  EXHAUST BRAKE RETARDER  INSPECTION  


PROCEDURE

Hide 1. CHECK EXHAUST RETARDER CHAMBER

C397425

Apply a vacuum to the chamber and check for vacuum leakage and smooth movement of the valve.

If problem is found, replace the exhaust retarder assembly.

Hide 2. CHECK VALVE BODY CLEARANCE AND OPENING ANGLE

a.
C397426

Using SST, check the valve body clearance with the chamber in a vacuum.

Standard clearance:

(14B) 0.1-0.4 mm (0.004-0.016 in.)

(1HZ) 0.2-0.3 mm (0.008-0.012 in.)



b.
C397427

With the valve fully opened, measure the angle of the valve to the body surface.

Opening Angle:

90°



Hide 3. IF NECESSARY ADJUST VALVE BODY CLEARANCE AND OPENING ANGLE

a.
C397428

Remove the cover.


b.

Apply a vacuum to the chamber and close the valve.


c.

Adjust the valve body to the standard clearance with the adjusting bolt.

Standard clearance:

(14B) 0.1-0.4 mm (0.004-0.016 in.)

(1HZ) 0.2-0.3 mm (0.008 -0.012 in.)



d.
C397429

Release the vacuum from the chamber and fully open the valve.


e.

Adjust the opening angle to the standard with the adjusting bolt.


f.

Install the cover.

Opening Angle:

90°