Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › VEHICLE STABILITY CONTROL SYSTEM › 2017.01–2018.07
RM2850E _54 Brake _073264 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0356689 VEHICLE STABILITY CONTROL SYSTEM U

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  VEHICLE STABILITY CONTROL SYSTEM  FAIL-SAFE CHART  


FAIL-SAFE OPERATION


·

If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator assembly and informs the ECM of a VSC system malfunction.

The brake actuator assembly turns off the solenoids and the ECM stops its VSC control according to signals from the skid control ECU. The vehicle will operate in a manner similar to a vehicle that is not equipped with ABS, TRC and VSC systems.

ABS control will be prohibited, but EBD control will continue to the extent that EBD control is possible. If EBD control is impossible, the brake warning light will come on to warn the driver (Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DIAGNOSIS SYSTEM).

·

If a VSC system component malfunctions before VSC control begins, VSC control will be prohibited. If a system component malfunctions during VSC control, the system will gradually stop performing control so as not to trigger a sudden change in vehicle operation.

If it is impossible for control to continue, the warning light comes on to inform the driver of system control termination (Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>DIAGNOSIS SYSTEM).


ABS, EBD and Brake Pressure Increase Function Systems
Malfunction Area Control Method
ABS system ABS, brake pressure increase function control, TRC and VSC control prohibited.
Brake pressure increase function system ABS, brake pressure increase function control, TRC and VSC control prohibited.
EBD system ABS, EBD, brake pressure increase function control, TRC and VSC control prohibited.

TRC and VSC Systems
Malfunction Area Control Method
Engine control system
(TRC and VSC system)
Before control: Disables control.
During control: Uses only the brakes to perform control.
Brake control system
(VSC system)
Before control: Disables control.
During control: Uses only the engine to perform control.
Brake control system
(TRC system)
Before control: Disables control.
During control: Uses only the engine to perform control.