Home › Engine / Hybrid System › 1HZ (INTAKE) › TURBOCHARGER
RM2850E _51 Engine / Hybrid System _073298 1HZ INTAKE _0356955 TURBOCHARGER A

1HZ INTAKE  TURBOCHARGER  REMOVAL  


PROCEDURE

Hide 17113 2.REMOVE INTAKE PIPE

a.
A423222

Disconnect the vacuum hose for the boost compensator.


b.

Disconnect the air hose clamp bolt.


c.

Remove the three bolts and intake pipe.


Hide 17167 3.REMOVE EXHAUST MANIFOLD HEAT INSULATOR

a.
A423223

Remove the five bolts and heat insulator.


Hide 4.DISCONNECT WATER BY-PASS HOSES

A423224

Hide 5.REMOVE TURBO HEAT INSULATOR

a.
A423225

Remove the two bolt and heat insulator.


Hide 6.REMOVE TURBOCHARGER STAY

a.
A423226

Remove the three bolts and turbocharger stay.


Hide 7.REMOVE TURBO OIL PIPE

a.
A423227

Remove the union bolt and two gaskets holding the turbo oil pipe to the cylinder block.


b.

Disconnect the turbo oil hose.


c.

Remove the two nuts, turbo oil pipe and gasket.


Hide 8.REMOVE TURBOCHARGER AND EXHAUST MANIFOLD ASSEMBLY

a.
A423228

Remove the twelve nuts, the turbocharger and exhaust manifold assembly and gaskets.


Hide 9.SEPARATE TURBOCHARGER AND EXHAUST MANIFOLD

a.
A423229

Remove the four nuts, turbocharger and gasket.


Hide 10.REMOVE NO.2 TURBO HEAT INSULATOR

a.
A423230

Remove the two bolts and No.2 turbo heat insulator.


Hide 11.REMOVE NO.1 TURBO WATER PIPE

a.
A423231

Remove the two nuts, No.1 turbo water pipe and gasket.


Hide 12.REMOVE TURBINE OUTLET ELBOW

a.
A423231

Remove the four nuts, turbine outlet elbow and gasket.